3309 õli olen alt välja lasknud 3 aastaga ikka 20+ liitrit ja Resetting Gearbox fluid change counter tehtud
ning ka Resetting the adaption toimis seisva mootoriga, aga jõnksud on jäänud.
Kas käigukasti adaption on see sama: 437: Control module adaptation ?
Pakub numbreid TCM -ECU Diagnostic software number .... 09463859 A 09463865 A 09463593 A 09480596 A
(ei mäleta kas mul luges välja sobiva numbri, esimene kord ei julgenud teha.)
Control module adaptation
Checking the software
Note! To carry out adaptation, the gearbox control module (TCM) must be programmed with specific software.
Ignition on
Read off the control module diagnostic number.
Check the read off diagnostic number against the diagnostic numbers given in the centre table.
If the diagnostic number is included in the table, the control module must be programmed with the latest software.
Press "pause" and select “Save a bookmark” so that the method can be resumed. Go to the software manager and program the control module with the latest software.
See the technical journal for information about the most recent software. Select Continue.
Control module adaptation
Conditions for adaptation
Note!
The oil level in the gearbox must be checked first to ensure that the software in the gearbox control module (TCM) can be adapted correctly.
Adjust if necessary. The gearbox fluid must also be at operating temperature (65 -110 °C)
Winter (W) mode must not be active when adapting
After activation of “Adaptation mode” and when the correct gearbox fluid temperature has been reached,
the message “ Gearbox fluid temperature too high” is displayed in the combined instrument panel display
During adaptation, gear position D must be used unless otherwise indicated.
The control module cannot be adapted in the "Man" (Geartronic) position.
Other information
To check and adjust the gearbox fluid level, see Oil level, checking .
Select Continue.
pikk õpetus jätkub► Show Spoiler